Project Server 2007 Timesheet AutoStatus Plus

Closed Issue: STSADM errors displaying incorrectly [4321]

ssanderlin — Wed, 15 May 2013 03:27:30 GMT

Command line errors for STSADM commands seem to be displaying incorrectly; specifically, a call to aspsetpwasite that neglects to include dbuser and dbpass and specifies useintegratedauth as false returns simply "command line error" with no additional information.

Closed Issue: General Exception received during SubmitStatus [4407]

ssanderlin — Wed, 15 May 2013 03:27:29 GMT

While processing timesheets from the data table, the first pass produces a GeneralUnhandledException at Microsoft.Office.Project.Server.WebService.Statusing.SubmitStatus. However, the timesheet is successfully processed the next pass through. Any ideas what might be causing this?

I do not have any other Server Side Events.

Closed Issue: URL in logs to access timesheets is incorrect [4716]

ssanderlin — Wed, 15 May 2013 03:27:29 GMT

It appears the server is accessing the previous URL - which has been forwarded to a seperate site just for the Workspace sites. Is is possible to show/change the URL it is accessing?

Any help would be appreciated, I'm not sure where to look to verify this configuration.

I've configured the server with the following command:

stsadm -o aspsetpwasite -url http://epmcluster.hearstbusinessmedia.com/hbmpwa -sspna
me HBMEPMSSP81 -dbserver hbm001grvclu02.companynet.org -dbname HBMEPMDB12_EPM_HB
MPWA_Reporting -useintegratedauth true -ssphostname http://epmcluster.hearstbusi
nessmedia.com:81 -dbuser companynet\hbmepmservice02 -dbpass XXXXXX

But I'm continually seeing this error in the logs:

--.
2:07:06 PM: FAILED due to an exception: The request failed with the error message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="http://epmdocs.hearstbusinessmedia.com/HBMPWA/_layouts/1033/error.aspx?ErrorText=The%20request%20failed%20with%20HTTP%20status%20404%3A%20Not%20Found%2E">here</a>.</h2>
</body></html>

--.
2:07:06 PM: SubmitStatus: True; timesheet URL: http://epmdocs.hearstbusinessmedia.com/HBMPWA/_vti_bin/PSI/Timesheet.asmx; statusing URL: http://epmdocs.hearstbusinessmedia.com:56737/HBMEPMSSP81/PSI/Statusing.asmx
2:07:06 PM:
2:07:06 PM: STEP 1 - Initialize Web Service References
2:07:06 PM: WARNING encountered exception: The request failed with the error message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="http://epmdocs.hearstbusinessmedia.com/HBMPWA/_layouts/1033/error.aspx?ErrorText=The%20request%20failed%20with%20HTTP%20status%20404%3A%20Not%20Found%2E">here</a>.</h2>
</body></html>

--.
2:07:06 PM: FAILED due to an exception: The request failed with the error message:
--
<html><head><title>Object moved</title></head><body>
<h2>Object moved to <a href="http://epmdocs.hearstbusinessmedia.com/HBMPWA/_layouts/1033/error.aspx?ErrorText=The%20request%20failed%20with%20HTTP%20status%20404%3A%20Not%20Found%2E">here</a>.</h2>
</body></html>

Closed Issue: 401 Unauthorized. [4884]

ssanderlin — Wed, 15 May 2013 03:27:28 GMT

This error shows up over and over in the AutoStatus log on my test server. Any assistance would be much appriciated.

10:43:00 AM: STEP 1 - Initialize Web Service References
10:43:00 AM: WARNING encountered exception: The request failed with HTTP status 401: Unauthorized.
10:43:00 AM: FAILED due to an exception: The request failed with HTTP status 401: Unauthorized.
10:43:00 AM: SubmitStatus: True; timesheet URL: http://cpi001/PWA/_vti_bin/PSI/Timesheet.asmx; statusing URL: http://cpi001:56737/SharedServices1/PSI/Statusing.asmx

Source code checked in, #70298

Project Collection Service Accounts — Mon, 01 Oct 2012 21:36:45 GMT

Upgrade: New Version of LabDefaultTemplate.xaml. To upgrade your build definitions, please visit the following link: http://go.microsoft.com/fwlink/?LinkId=254563

Source code checked in, #70297

Project Collection Service Accounts — Mon, 01 Oct 2012 21:31:58 GMT

Checked in by server upgrade

New Post: Job not processing records captured in SQL table

pvdborne — Wed, 19 Oct 2011 11:58:23 GMT

Thanks Steve, I will give it a try..and let you know the result

New Post: Job not processing records captured in SQL table

ssanderlin — Tue, 18 Oct 2011 13:53:52 GMT

pvdborne: The problem is caused by invalid data in the timesheet, generally because of rows that were once associated with an assignment but the assignment was deleted or shortened. Try deleting and recreating the timesheet, that generally fixes it.

New Post: Timesheet issues

ssanderlin — Tue, 18 Oct 2011 13:50:50 GMT

This problem usually arises when the timesheet contains invalid data. You may need to delete the timesheet and recreate.

Commented Issue: ServerEventHandlerDuplicateEntry [6026]

ssanderlin — Tue, 18 Oct 2011 13:49:10 GMT

After having it tested, we installated the AutoStatusPlus tool on the ProjectServer Production Server. In the Site Features it was Activated, and since that worked OK, we turned it off again, to wait for the actual implementation date.
After trying to turn it on, it was stated that we needed to run the "stsadm -o aspsetpwasite" again. So we did, and when trying to Activate the site again, it ended in an error 22010: "ServerEventHandlerDuplicateEntry".

Can I rename whatever is necessary, where and how? Thx for the help !

Niek
Comments: ** Comment from web user: ssanderlin **

Sorry for the extremely late response. Go into the Server Event Handlers menu in Server Settings and delete the registered handler manually.

New Post: Job not processing records captured in SQL table

pvdborne — Mon, 17 Oct 2011 14:38:15 GMT

Hi,

My customer is using the latest solution and now he is expiencing exactly the same issue as reported by azjimwoodny Mar 5 2010 at 11:40 PM. This is after a number of months in use.

Most timesheets are imprted correctly, but some generate this error. What could be the issue.

Can you please help me out?

Thanks,

Peter van den Borne

New Post: Timesheet issues

randybglobal — Wed, 31 Aug 2011 19:42:40 GMT

We are receiving three successive 9681 events, an error and two information, recurring almost constantly. The error is as follows:

FAILED due to a SoapException: ==============================

Error:

System.Web.Services.Protocols.SoapException: ProjectServerError(s) LastError=GeneralUnhandledException Instructions: Pass this into PSClientError constructor to access all error information

at Microsoft.Office.Project.Server.WebService.Statusing.ImportTimesheet(Guid periodUID)

==============================

PSClientErrorOutput:

GeneralUnhandledException

Exception InnerXML:

============================

Additionally, we are experiencing the following front-end behavior:

1. User submitted a timesheet 6/19-2011-6/25/2011 with time against a task; when the time was accepted into the project plan, no Actual Work was recorded against the task. Resource had to notify Project Owner that the task was completed and what timesheet time was recorded against.

2. Same user as above unable to adjust Remaining Work on project tasks without getting a queue job failed error. Other users are able to adjust Remaining Work from his computer. Have reviewed ActiveX Controls; cleared cache; cleared browser history; removed user from AD; removed from PWA Group, put back in and saved; removed from company AD account; had user change Remaining Work from other computer without avail; included PWA in trusted sites; reviewed add-ons and verified pop-up blockers were disabled.

3. Timesheets reverting back to previous setting to require additional approver even with Fixed Approval Routing selected. During week of 8/15/2011, began seeing Set Next Approver on certain Resource Manager accounts with Resource Manager listed as next approver. Upon selecting Approve, timesheet review would result in Failed and Blocking Correlation in the queue with the following error message:

<error id="3205" name="TimesheetInvalidApprover"

We are currently running on Service Pack 2 with Cumulative Updates through Aug 2011.

Created Issue: ServerEventHandlerDuplicateEntry [6026]

nvhussen — Thu, 07 Apr 2011 09:58:59 GMT

New Post: One users timesheet not processing

JohnHolding — Wed, 23 Mar 2011 11:29:43 GMT

Hi All

I'm fairly sure it's something simple but I can't for the life of me figure it out.

I have one of my users whose timesheet will not process through autostatus plus. The user is a little unusual as previously it was handled as a generic user without a PWA Timesheet, but has now been updated to use the PWA Timesheet system. The timesheet side works as expected, the user can create their timesheet and can see all their assignments. The timesheet will process properly in PWA but fails when it gets to autostatusplus. Examining the tsAutoStatusPlusData table, the timesheets now continually fail every minute or so.

I have compared the users rights and groups with a similar user to ensure that they had the same permissions and groups, which of course they do. I even added the user to the Admin group to see if that would help, but of course it made no difference at all.

Thinking it may be down to the windows user associated with the account, I changed it to one that I knew worked, but this made no difference either.

If you have any thoughts about what I might check to resolve this issue I would be most grateful.

John Holding

New Post: just doesn't work

johnb714 — Wed, 29 Dec 2010 22:41:06 GMT

I'm sure I'm doing something wrong, but everything is installed an I have put in several commands to change parameters, and they get accepted. However whenever I submit a timesheet, it is not importing it. I am set to "onsubmitted" and 1 minute interval.

Source code checked in, #55450

ssanderlin — Mon, 27 Dec 2010 21:03:22 GMT

Source code checked in, #55449

ssanderlin — Mon, 27 Dec 2010 21:00:15 GMT

Source code checked in, #55370

ssanderlin — Fri, 24 Dec 2010 16:43:07 GMT

Commented Issue: Problem in change the intervals of AutoStatusPLUS tool [5480]

saber13812002 — Sun, 28 Nov 2010 10:17:00 GMT

when we want to change the interval of autostatusplus tool from default (1 minute) to any other settings (e.g 1440 mins) the AutoStatus Plus doesn't work.

C:
cd "Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN"
stsadm -o aspsetpolling -url http://cpfanni/pw -interval 1440

error log file:

11/28/2010 11:57:30.00 OWSTIMER.EXE (0x0748) 0x0754 Windows SharePoint Services Timer 5uuf Monitorable The previous instance of the timer job 'Config Refresh', id '{07C09B1A-DF5F-4194-B320-DD66EE67F8F4}' for service '{E0279894-B96D-4C96-8313-322BD80BBB40}' is still running, so the current instance will be skipped. Consider increasing the interval between jobs.
11/28/2010 11:57:32.99 OWSTIMER.EXE (0x0748) 0x0754 Windows SharePoint Services Timer 5uuf Monitorable The previous instance of the timer job 'Application Server Timer Job', id '{548F316A-D7FD-400F-A4EE-E707160789E9}' for service '{63FD5794-21FC-41D5-9EE7-F4A96B94D915}' is still running, so the current instance will be skipped. Consider increasing the interval between jobs.
Comments: ** Comment from web user: saber13812002 **

when we change the interval to 1 min again:

Event Type: Error
Event Source: .NET Runtime 2.0 Error Reporting
Event Category: None
Event ID: 1000
Date: 2010/11/28
Time: 01:38:04 ب.ظ
User: N/A
Computer: CP
Description:
Faulting application w3wp.exe, version 6.0.3790.3959, stamp 45d6968e, faulting module kernel32.dll, version 5.2.3790.4480, stamp 49c51f0a, debug? 0, fault address 0x0000bef7.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:

Created Issue: Problem in change the intervals of AutoStatusPLUS tool [5480]

saber13812002 — Sun, 28 Nov 2010 08:35:00 GMT